Gas Spray Absorption Scrubber Cleaner Tower

Basic Info

Model No.: MCFS-GS01

Condition: New

Certification: ISO, CE

Automation: Other

Treatment: Chemical Treatment

Additional Info

Packaging: Wooden Box

Brand: MeCan

Transportation: Ocean

Place of Origin: China (Mainland)

Supply Ability: 200 sets per month

Certificate: ISO9001, ISO14000

Port: Guangzhou,Shenzhen

Product Description

Chemical Waste Gas Spray Absorption Scrubber Cleaner Tower Industrial Spray Purification Tower

Principle

Characteristics
 

1. Before use, check the intact valves of all systems of the equipment, the correct selection and proportion of absorbent agents, and timely replenishment of absorbent solutions when they fail to meet the specified requirements. When starting, the pump should be turned on for 3-5 minutes before the fan is turned on. When closing this purification system, the fan should be shut down for 2-3 minutes before the pump can be shut down. Otherwise, the motor will be burned and the packing will be blocked, which will affect the purification effect. 
2. The wiring of fans and pumps should not move randomly. They should be turned correctly and not reversed. Otherwise, they will damage the motor and cause accidents. 
3. After the operation and delivery of the equipment, the user unit should send a special person to keep and use it. Regular inspection shows that the equipment is abnormal sound or leaking water. It should be shut down and repaired before it can be used. 
4. The equipment is installed outdoors. The motor of the pump fan should be made of rain-proof cover so as not to damp the motor. Whether the equipment is installed indoors or outdoors, if fiberglass reinforced plastics is used, protective cover must be installed to prevent screw loosening, bearing damage or suction of debris, explosion when breaking impeller and injuring personnel, resulting in accidents. 
5. Replacement and allocation of purifying solution: The formulation ratio of purifying absorbent solution in our factory is determined by the gas source and concentration of user units. It will be provided to user managers after the equipment is tested and accepted normally.

Product Description

No.	Dia.(mm)	Height(mm)	Power(KW)	Air volume(h/m3)	spray	Thickness(mm)
1	1000mm	2500	0.75	5000	1	6
2	1200mm	3700	1.5	8000	2	8
3	1500mm	4000	2.2	12000	2	8
4	2000mm	5500	3	20000	3	10
5	2500mm	5500	3	30000	3	10

We still have the medical waste incinerator, see the link