|Payment Type:||T/T,Money Gram,Western Union|
|Min. Order:||1 Set/Sets|
|Delivery Time:||30 Days|
Model No.: MCWS-5
Item: Professional Medical Sewage Treatment Equipment
Material: Stainless Steel, Carbon Steel
Usage: Wastewater Treatment
Control Mode: Full-automatic Control
Application: Waste Water Treatment
Anti-corrosive Treatment: Anti-corrosive Paint
Key Word: Dissolved Air Flotation
Processing Capacity (m³/h): 4-5
Main Motor Power (Kw): 4
Packaging: Wooden box and dry container
Place of Origin: China (Mainland)
Supply Ability: 100 sets per month
MCWS-5 dissolved air flotation machine is mainly used for separating and removing the micro-suspended matters, the destiny of which is close to water. Air flotation method refers to one kind of water purification method where the air-dissolving water generated through the air dissolving system generates multiple micro bubbles in water through the fast decompression and some of the bubbles are then attached on the particle surface of the sundries that are well flocculated in the water, forming the suspended matters, the integral density of which is less than 1 and then the suspended matters are made to raise on the water surface by the buoyancy.
Scope of Application
Air flotation method can be widely used in the following water supply and drainage projects, such as:
1. Algae removal and turbidity reduction of tap water and landscape water, both of which is from the lake and river:
2. Pre-treatment of the domestic sewage and sludge concentration;
3. Treatment of industrial water: the recovery of paper-making off-machine water pulp and clean water; the removal of printing and dyeing wastewater chromaticity and sundries; removal of different heavy metal ions in the electroplating wastewater; separation of oil refining wastewater and oil; removal of tanning wastewater sundries; treatment of industrial wastewater such as chemical engineering ,food, wood spinning, slaughtering , brewing, ore dressing and washing.
The main design parameters of air flotation method include the remaining time, duration of flotation, surface loading rate, reflux ratio and gas dissolving pressure. The hydraulic retention time of air flotation tank is 5-35MIN and the surface loading rate is 5-9m³/(m2h).
The gas dissolving pressure and reflux ratio can be adjusted based on the requirements for the treatment effect and this can also reduce the operation and maintenance fees dramatically. Air flotation method can also resolve the problems that can be hardly resolved by sedimentation method. Compared with the sedimentation method, the infrastructure fees of air flotation tank is less due to the short retention time, but the treatment effect is much better. Air flotation is one of the most effective measure against the circumstances above as well as one of the most critical items in separation technology.
1, The system is provided with integrated combination way, which can reduce the space effectively, occupy a smaller area, consume less energies and facilitate installation and transportation;
2, High in automation, convenient, in operation and simple and manage ment;
3, High air dissolving efficiency, stable treatment effect; in particular, the air dissolving pressure and reflux ratio of air dissolving water can be adjusted as required.
4, Either single or dual air-dissolving device can be provided based on the water quality and process requirement;
5, Highly effective back fleshing releaser is used to ensure the stability of flotation machine while improving the utilization efficiency of air-dissolving water;
6, Low-noise compressor is used to reduce the noise that is always troublesome.
|Air-dissolving water capacity (m³/h)||main motor power (Kw)||Power of foam remover (Kw)||
Power of air compressor
|Air-dissolving tank size||
Guangzhou MeCan Medical Limited
Address: Room 510,Yidong Mansion,No.301-303,Huanshi Middle Road,Yuexiu,Guangzhou City,Guangdong,China,Guangzhou,Guangdong
Contact Person: Joe Jiang